 |
 |  |  |  |  |  |  |  |  |
Speedy Carve Block 4" x 6"
 Pink linoleum that's flexible, durable, and will not crack, crumble or break. Approx. 1/4" thick. |  | Speedy Carve 11 3/4" x 11 3/4"
 Pink linoleum that's flexible, durable, and will not crack, crumble or break. Approx. 1/4" thick. |  | Unmounted gray Linoleum 8" x 10"
 Battleship gray unmounted linoleum with jute back. Approx 1/8" thick. Great for shallow stamps on clay. |  | Linoleum Cutter Assortment No.1
 Used for carving on linoleum blocks. Contains one Lino Handle and one each of gouges numbers 1, 2, 3, 5, and 6. |  | Linoleum Cutter Assortment No. 2
 Used for carving on linoleum blocks. Contains two lino handles and one each of gouges numbers 1, 2, 3, 4, 5, and 6. |
 |
 |  |  |  |  |  |  |  |  |
Fabric w/ Screen 8" x 10"
 Used for silk screening images onto plaster, clay, paper, etc. Fabric is 110 mesh, which allows most underglazes and glazes to pass through. Screen fabric is cord-locked in grooves and can be tightened or replaced. |  | Squeegee - Graphic and Fabric
 Dual edged Red Baron squeegee is used to load up the screen with glaze, inks, or screen filler. Either edge can be used for clay applications... but, for an added bonus, the fabric side reduces binding when printing directly on cloth. |  | Mayco Designer Silk Screens
 These can be used on a variety of surfaces: greenware, clay, earthenware bisque, stoneware bisque or glass.
They can also be used on non-ceramic or glass surfaces, such as fabric, wood, paper, etc.
The screen size is 12 1/2" H x 18" long, with the actual printed area measuring 11 1/2" H x 15" long.
The designs are approximately 3" to 4" at their widest/longest dimension.
If you want one that we don't carry, we can order it for you. Don't forget that you'll need silkscreen medium. |  | Decal Paper 10 pk Fired on Images
 *NOTE as of 2019 a few of HP’s new black-only laser printers do not contain the necessary iron oxide to work with this process .It should say Iron Oxide or Ferrite in order to work. Canon Black-Only laser printers all still work! |  | Speedy Carve Block 6" x 12"

|
 |
 |
Underglaze Decals
 Underglaze Transfer Paper- Brush water on the decal surface (the side with the color) and place it on the flat surface of the leather hard or bisque-fired clay work, then use a dry hake brush to drive out the air in between the paper and clay surface. Wait for the paper to dry and peel it off from the work, then apply the clear glaze on the top. Can be fired cone 06 to cone 10 |