Click to enlarge<hr>Skutt Kilns

Skutt KilnMaster Series: Especially well finished kilns with heavy duty side latches to hold sections together. The sealed touch-pad control buttons are single function and grouped for ease of use. The solid state circuitry gives you the features you expect: Cone Fire or Ramp/Hold modes. Digital readout, Delay start, Adjustable temperature alarm and a cone table. Failure detection circuitry can detect component failure and shut off the kiln to avoid damage or loss of ware. The larger models come with the "lid lifter". You can literally raise and lower the kiln lid with two fingers. This series of Skutt kilns has become our most popular line and since their introduction they have been very reliable.

New KMT Touchscreen Controller: Like Your Smartphone, the new KMT controller navigates with just a touch of a finger. Guided Start walks you through the programming process with helpful messages and full sentences. You'll be confident you have done everything correctly before you press Start. Innovative hinges allow you to move the controller up and down to an angle that is comfortable for you to program. Help Screens give you detailed information about the screen you are currently viewing. Detailed Diagnostics tools make it faster to troubleshoot kiln issues. Your kiln is connected to the internet, so our technicians can view the data right from their desk. Program Library with helpful programs for unique processes like Slow Sculpture, Single Fire, and Cone 5 Crystal Glaze. A Free App works in conjunction with the WiFi and allows you to monitor your kiln temperature and status from your smartphone.

Standard Features:
-Most kilns are UL listed.
-Available in 208 or 240 volt for the same price.
-Sealed dust free lid with full floating hinge.
-Air cooled switch box, louver to keep out dust.
-Multi-sided design eliminates hot spots and all are covered with a stainless steel jacket.
-Double peephole plugs in each section make it easier to place witness cones.
-Two year limited warranty.


If you need 3 phase wiring or 3" brick, please call for prices. For Skutt's complete line go to www.skutt.com

For information on Houston area Skutt kiln repair, give us a call: 713-864-6442.




KMT1627-3PK Cone 10 Kiln, Touchscreen


Inside Dimensions: 46" x 30.75" x 27" D | 18.5 Cu Ft
Shipping Weight: 535 pounds
Volts: 240 Volt, 3phase | Amps: 55 | Fuse: 90

KMT1627-3PKRegular price: $8,050.00Sale price: $7,048.00

KM1627-3PK Cone 10 Kiln, Digital Controller


Inside Dimensions: 46" x 30.75" x 27" D | 18.5 Cubic Feet
Shipping Weight: 535 pounds
Volts: 240 Volt, 3phase | Amps: 55 | Fuse: 90

KM1627-3PKRegular price: $7,750.00Sale price: $6,785.00

Kiln Furniture 1627

8ea 1" 1227 half shelves and 13x16" rect. shelves, 5 sm post assort

Furn1627Regular price: $1,375.00Sale price: $1,169.00

KMT1231-3PK Cone 10 Kiln, Touchscreen


Inside Dimensions: 28" x 31" D | 11.57 Cubic Feet
Shipping Weight: 450 pounds
Volts: 240 | Amps: 72 | Fuse: 90

KMT1231-3PKRegular price: $5,025.00Sale price: $4,399.00

KM1231-3PK Cone 10 Kiln, Digital Controller


Inside Dimensions: 28" x 31" D | 11.57 Cubic Feet
Shipping Weight: 450 pounds
Volts: 240 | Amps: 72 | Fuse: 90

KM1231-3PKRegular price: $4,725.00Sale price: $4,137.00
KilnMaster Touchscreen Option (Factory Installed)KilnMaster Touchscreen Option (Factory Installed)
Click to add touchscreen, when ordering KM kilns

kmtupgrdRegular price: $300.00Sale price: $265.00

KMT1227-3PK Cone 10 Kiln, Touchscreen


Inside Dimensions: 28" x 27" D | 11.57 cubic feet
Shipping Weight: 410 pounds
Volts: 240 | 1PH / Amps: 60 | Fuse: 80

KMT1227-3PKRegular price: $4,895.00Sale price: $4,286.00

KM1227-3PK Cone 10 Kiln, Digital Controller


Inside Dimensions: 28" x 27" D | 11.57 cubic feet
Shipping Weight: 410 pounds
Volts: 240 | 1PH / Amps: 60 | Fuse: 80

KM1227-3PKRegular price: $4,595.00Sale price: $4,023.00

Kiln Furniture -1227 (or 1231)

Fits 1231 and 1227 models: 8 each 1" half shelves with 1/5" large post assortment. 182lbs ship weight.

furn1227Regular price: $720.00Sale price: $612.00

KMT1227-3 Kiln, Touchscreen

Inside Dimensions: 28" x 27"D | 9.9 cubic feet
Shipping Weight: 400 pounds
Volts: specify below | Amps: 48

KMT1227-3Regular price: $4,270.00Sale price: $3,738.00Model: 

KM1227-3 Kiln, Digital Controller

Inside Dimensions: 28" x 27"D | 9.9 cubic feet
Shipping Weight: 400 pounds
Volts: specify below | Amps: 48

KM1227-3$3,476.00Model: 

Furniture 1227, Low-Fire

Low-fire, 8ea 5/8" 1227 half shelves and 1.5" large post assortment, 140lbs ship weight

Furn1227LFRegular price: $655.00Sale price: $557.00

KMT1027 Kiln, Touchscreen

Inside Dimensions: 23-3/8" x 27"D | 7 cubic feet
Shipping Weight: 290 pounds
Volts: Specify Below | Amps: 48

KMT1027Regular price: $3,670.00Sale price: $3,213.00Model: 

KM1027, Digital Controller

Inside Dimensions: 23-3/8" x 27"D | 7 cubic feet
Shipping Weight: 290 pounds
Volts: Specify Below | Amps: 48

KM1027Regular price: $3,370.00Sale price: $2,994.00Model: 

Kiln Furniture - Model 1027

8 each 5/8" half shelves with 1/5" tri post assortment. 94lbs ship weight.

furn1027$383.00

KMT1018 Cone 10 Kiln, Touchscreen

inside dimensions: 23-3/8" x 18"d | 4.7 cu. ft.
shipping weight: 240 pounds
volts: specify below | amps: 38.5 | fuse: 50

KMT1018Regular price: $3,080.00Sale price: $2,697.00Model: 

KM1018, Digital Controller

Inside Dimensions: 23-3/8" x 18"D | 4.7 cu. ft.
Shipping Weight: 240 pounds
Volts: Specify Below | Amps: 38.5 | Fuse: 50

km1018$2,434.00Model: 

Kiln Furniture - Model 1018

6 each 5/8" shelves with 1/5" tripod post assortment. 72lbs ship weight.

fun1018$315.00

KMT818 Cone 10 Kiln, Touchscreen

Inside Dimensions: 17.5" x 18"D | 2.6 cu. ft.
Shipping Weight: 145 pounds
Volts: Specify Below | Amps: 27.8 | Fuse 40

KMT818Regular price: $2,290.00Sale price: $2,005.00Model: 

KM818 Cone 10 Kiln, Digital Controller

Inside Dimensions: 17.5" x 18"D | 2.6 cu. ft.
Shipping Weight: 145 pounds
Volts: Specify Below | Amps: 27.8 | Fuse 40

KM818$1,742.00Model: 

Kiln Furniture - Model 818

2 full 5/8" & 3 half shelves with 1.5" post assortment. 56lbs ship weight.

furn818$230.00

KM714, Digital Controller

Inside Dimensions: 14-3/8" x 13.5"D | 1.4 cu. ft.
Shipping Weight: 95 pounds, Cone 8
Volts: 240/208 | Amps: 20

KM714$1,453.00

KS714, Manual Cone 8 kiln

Inside Dimensions: 14-3/8" x 13.5"D | 1.4 cu. ft.
Shipping Weight: 95 pounds
Volts: 240/208 | Amps: 20

KS714$1,440.00
Glaze Tech Kiln, Digital Controller
240 V / 1 phase / 2350 / W14.5" x D9" The Glazetech test kiln fires up to cone 10 with a 9" high, 14" square chamber that is perfect for multiple firings of tiles or to test glazes on a vertical surface. 3-Key controller, 240V /17 amp.

glazetechkiln$1,348.00

Kiln Elements - Model 1227

When requesting an element we must also have it's location in the kiln (top, bottom, middle) and the voltage, 240 or 208.

element1227$57.00
Click to enlarge
Lid Lifter Retrofit

Add the Lid Lifter to your existing Skutt kiln. Lift heavy lids with ease. Most helpful with 10 or 12 sided kilns.

lidlifter$325.00Model: 

Elements - Model 1027

When requesting an element we must also have it's location in the kiln (top, bottom, middle) and the voltage, 240 or 208.

element1027$57.00

Element - Model 1018

When requesting an element we must also have it's location in the kiln (top, bottom, middle) and the voltage, 240 or 208.

element1018$57.00
Thermocouple for all KM Models
thermocouple1515KM$16.00